Garden Poly Fittings

13mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

13mm End Plug

13mm end plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

19mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

13mm Poly Joiner

13mm Low density poly x 13mm Low density poly barbed joiner, requires 2 x poly clamps or Cobra clips to make the connection secure.

19mm Poly Joiner

Used to join 19mm poly to 19mm poly and to make fast and secure repairs.   Make sure that you use a clamp or Cobra clip.

13mm Poly Elbow

13mm Poly x poly barbed elbow used for making 90 degree turns.

19mm End Plug

End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

25mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

13mm Poly Tee

13mm poly x poly x poly barbed Tee.  

Reducing Joiner, 19mm to 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 19mm poly pipe and the other side takes the smaller 13mm.  

19mm Poly Elbow

Poly x poly elbow used for making 90 degree turns.

13mm x 1/2" BSP Director (Hose Tail)

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

19mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

CAPO Rubber Grommet 13mm ID for XPANDO fittings

The CAPO rubber grommet is used with XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   The 13mm ID CAPO suits the 16mm Antelco drill bit (code 10151845).

19mm Poly Tee

Poly x poly x poly Tee.  

19mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

13mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

19mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

25mm Poly Joiner

25mm barbed joiners are used to join a further length of 25mm poly to an existing length as well as making repairs easier and faster.   Remember to use clamps with these fittings to prevent the pipe blowing off the fitting.

Reducing Joiner, 25mm x 19mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm. 

25mm End Plug

25mm End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

13mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors are also know as hose tails and this one fits 13mm low...

CAPO Rubber Grommet 19mm ID x 19mm XPANDO fittings

The CAPO rubber grommet is used with XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm or 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   The 19mm ID CAPO suits the 22mm Antelco drill bit (code...

19mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

XPANDO 13mm inlet x 13mm Take-Off

XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145735 Grommet.

13mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

Reducing Tee 19mm x 13mm

The reducing tees are used where a branch line needs to be smaller than the main.

13mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

25mm x 1" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 1" female BSP solenoid valves and any other female BSP fitting.

25mm x 3/4" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 3/4" female BSP solenoid valves and any other female BSP fitting.

Reducing Joiner, 25mm x 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm. 

25mm Poly Elbow

25mm barbed poly elbows are used to make a 90 degree turn in the poly pipe and so prvent any kinking, make sure that you use clamps with this fitting.

25mm Poly Tee

25mm poly tees are used to provide an off-take for another 25mm poly line, make sure that you use clamps with these fittings.

Reducing Tee 25mm x 13mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.   25mm x 13mm.

19mm x 3/4" male Elbow

Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.

25mm x 1/2" male Elbow

25mm poly x 1/2" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Reducing Tee, 25mm x 19mm Branch

The reducing tees are used where a branch line needs to be smaller than the main. 25mm x 19mm.

XPANDO 19mm inlet x 19mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.

19mm x 3/4" male Tee

19mm Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 1/2" male Tee

25mm poly x 1/2" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" male Elbow

25mm poly x 3/4" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" male Tee

25mm poly x 3/4" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

19mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

25mm x 1/2" Female Threaded Elbow

25mm poly x 1/2" female BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Pink Plumbers Teflon Tape - 10m roll

Our Pink Plumbers Tape is true tradesman quality thick heavy duty teflon tape and is recommended for all poly, plastic, brass and steel BSP fittings to provide a perfectly waterproof connection.   Do not use cheap imitations!   There...

13mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

XPANDO 19mm inlet x 25mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.

19mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

25mm x 1/2" Female Threaded Tee

25mm poly x 1/2" female BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

13mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

13mm Poly x Click-On Connector

This item connects 13mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 13mm stainless steel Cobra clip to hold the poly pipe.

13mm In-Line Tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.