25mm Poly Fittings

25mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

25mm Poly Joiner

25mm barbed joiners are used to join a further length of 25mm poly to an existing length as well as making repairs easier and faster.   Remember to use clamps with these fittings to prevent the pipe blowing off the fitting.

Reducing Joiner, 25mm x 19mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm. 

25mm End Plug

25mm End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

25mm x 1" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 1" female BSP solenoid valves and any other female BSP fitting.

25mm x 3/4" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 3/4" female BSP solenoid valves and any other female BSP fitting.

Reducing Joiner, 25mm x 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm. 

25mm Poly Elbow

25mm barbed poly elbows are used to make a 90 degree turn in the poly pipe and so prvent any kinking, make sure that you use clamps with this fitting.

25mm Poly Tee

25mm poly tees are used to provide an off-take for another 25mm poly line, make sure that you use clamps with these fittings.

Reducing Tee 25mm x 13mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.   25mm x 13mm.

25mm x 1/2" male Elbow

25mm poly x 1/2" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Reducing Tee, 25mm x 19mm Branch

The reducing tees are used where a branch line needs to be smaller than the main. 25mm x 19mm.

25mm x 1/2" male Tee

25mm poly x 1/2" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" male Elbow

25mm poly x 3/4" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" male Tee

25mm poly x 3/4" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 1/2" Female Threaded Elbow

25mm poly x 1/2" female BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Pink Plumbers Teflon Tape - 10m roll

Our Pink Plumbers Tape is true tradesman quality thick heavy duty teflon tape and is recommended for all poly, plastic, brass and steel BSP fittings to provide a perfectly waterproof connection.   Do not use cheap imitations!   There...

25mm x 1/2" Female Threaded Tee

25mm poly x 1/2" female BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm In-Line tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses as well as any other irrigation system.

Cobra Clip for 25mm Low Density Poly Pipe C27/8

Cobra Clips are full stainless steel clips used to provide a permanent and drip-proof connection for poly pipe to poly fittings.   Excellent value for money, extremely long life and ease of application are 3 of the many popular benefits of the...