Antelco

13mm In-Line Filter

13mm In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used.   Ideally, you should install a 25mm plastic disk filter at the tap but the...

13mm In-Line Tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.

13mm Poly Joiner - Bag of 10

13mm Low density poly x 13mm Low density poly barbed joiner, requires 2 x poly clamps or Cobra clips to make the connection secure. This is for a bag of 10

13mm x 1" Director - Bag of 10

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors...

13mm x 1/2" BSP Director (Hose Tail) - Bag of 10

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors...

13mm x 1/2" Female Threaded Elbow - Bag of 10

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well...

13mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above...

13mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

13mm x 1/2" male Tee - Bag of 10

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top. This is for a bag of 10

13mm x 3/4" Director - Bag of 10

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting, you will need a clamp to hold the low density poly onto the director.   Directors...

19mm End Plug

End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

19mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.   The 19mm poly clamp can be used on 19mm low density poly pipe and...

19mm Poly Joiner

Used to join 19mm poly to 19mm poly and to make fast and secure repairs.   Make sure that you use a clamp or Cobra clip.

19mm Poly x Click-On Connection

This item connects 19mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 19mm stainless steel Cobra clip to hold the poly pipe.

19mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

19mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well...

19mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above...

19mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

19mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

19mm x 3/4" male Elbow

Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.

19mm x 3/4" male Tee

19mm Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm End Plug

25mm End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

25mm In-Line tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses as well as any other irrigation...

25mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.   This clamp can be used on all 25mm low density black poly pipe.

25mm Poly Elbow

25mm barbed poly elbows are used to make a 90 degree turn in the poly pipe and so prvent any kinking, make sure that you use clamps with this fitting.

25mm Poly Joiner

25mm barbed joiners are used to join a further length of 25mm poly to an existing length as well as making repairs easier and faster.   Remember to use clamps with these fittings to prevent...

25mm Poly Tee

25mm poly tees are used to provide an off-take for another 25mm poly line, make sure that you use clamps with these fittings.

25mm x 1" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 1" female BSP solenoid valves and any other female BSP fitting.

25mm x 1/2" Female Threaded Elbow

25mm poly x 1/2" female BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 1/2" Female Threaded Tee

25mm poly x 1/2" female BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 1/2" male Elbow

25mm poly x 1/2" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 1/2" male Tee

25mm poly x 1/2" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" BSP Director

Directors are used to connect 25mm low-density poly pipe onto 3/4" female BSP solenoid valves and any other female BSP fitting.

25mm x 3/4" male Elbow

25mm poly x 3/4" male BSP elbow used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

25mm x 3/4" male Tee

25mm poly x 3/4" male BSP tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

32mm Director x 25mm male BSP

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm Director (hose tail) is used to join 32mm low density poly pipe to a female 1" BSP thread,...

32mm Joiner - Barbed for low density poly pipe

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm joiner is used to join 32mm low density poly pipe (not green stripe or blue stripe),...

32mm Low Density poly pipe end plug

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm End Plug is used to literally plug the end of the pipe line, 32mm low density poly pipe...

32mm Reducing Tee 32 x 25

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm Reducing Tee is used to join 32mm low density poly pipe to a 25mm low density poly pipe...

32mm x 25mm Reducing Joiner

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm reducing joiner 32mm x 25mm is used to join 32mm low density poly pipe to 25mm low density...

4.5mm Barbed Connector

These joiners are barbed on both ends and are used to join our 4mm flexible tubing.

4.5mm Tee - All barbed ends

Used to connect 4mm flexible tube in a "T" configuration.

4mm Barbed Elbow

To make a sharp 90 degree turn in 4mm flexible tube, use an elbow.

4mm Barbed In-Line Tap - Variable Flow

A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray.   These taps are barbed and will...

4mm Goof Repair Plugs Rack of 10

Goof plugs are used to block unwanted holes in low-density poly tube.   The 4mm goof plug will block any hole less than 4mm in diameter such as most of those made by removing a rigid riser...

4mm Mounting Clips with Nail

These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.

4mm Rigid Riser x 200mm - Bag of 20

This is a 200mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I...

4mm Rigid Riser x 300mm - Bag of 20

This is a 300mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I...

4mm Variable Flow Sprinkler with stake and tube - Pack of 10

This is fantastic value!   Our very popular 4mm Mini-sprinkler with an adjustment tap, plus, a hammer stake and 400mm of tube with a plug-in adaptor to go straight into the poly pipe supply...

4mm Variable Mini-Sprinkler

This mini-sprinkler has an adjustment tap that allows you to vary the distance that the sprinkler will throw.   This item is perfect for garden beds, small turf areas and has a throw...

8 L/H Antelco CETA Pressure Compensated Dripper

The Antelco CETA pressure compensating dripper is made in Australia by Antelco, an Australian Owned company.   This is one of the most accurate drippers available and with...

Adjustable Veri-Flow Dripper

The Veri-Flow adjustable dripper is ideal for irrigating large pots, rose bushes and any shrubs and smaller trees.   With an adjustable output from 0 - 60 L/hour, this is one of our most...