Antelco

CAPO Rubber Grommet 13mm ID for XPANDO fittings

The CAPO rubber grommet is used with XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   The 13mm ID...

CAPO Rubber Grommet 19mm ID x 19mm XPANDO fittings

The CAPO rubber grommet is used with XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm or 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   The...

Elbow 32mm barbed low density poly pipe

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm elbow is used to join 32mm low density poly pipe in a 90 degree configuration (not green...

Micro stake 320mm with 400mm tube and adaptor

The micro stake is used to supply water to any of our 4mm threaded sprays and micro-sprinklers.   It provides a very secure mounting and is easy to connect to the low-density poly supply...

Pot Dripper on a Stake

This is also one of our most popular drippers on a stake.   Use 4mm flexible tube to connect to the supply line and this dripper will provide between 3 and 6 L/hour depending on the...

Reducing Joiner, 19mm to 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 19mm poly pipe and the other side takes the smaller 13mm.  

Reducing Joiner, 25mm x 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm. 

Reducing Joiner, 25mm x 19mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm. 

Reducing Tee 19mm x 13mm

The reducing tees are used where a branch line needs to be smaller than the main.

Reducing Tee 25mm x 13mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.   25mm x 13mm.

Reducing Tee, 25mm x 19mm Branch

The reducing tees are used where a branch line needs to be smaller than the main. 25mm x 19mm.

Tee 32mm barbed for low density poly pipe

The Antelco brand is made in Australia from excellent raw materials, they always work.   This 32mm Tee is used to join 32mm low density poly pipe (not green stripe or blue stripe), because...

Vari-Jet Spray - 1/2 circle 180 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

Vari-Jet Spray - 1/4 circle 90 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

Vari-Jet Spray - Full circle 360 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

XPANDO 13mm inlet x 13mm Take-Off

XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145735 Grommet.

XPANDO 19mm inlet x 19mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.

XPANDO 19mm inlet x 25mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.