Camlocks

20mm "DP" - 20mm Camlock Dust Plug

Camlock dust plugss are used to keep foreign objects out of any female camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

25mm "DP" - 25mm Camlock Dust Plug

Camlock dust plugss are used to keep foreign objects out of any female camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

20mm 'E' - 20mm Male Camlock x 20mm Hose Tail

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

20mm 'F' - 20mm Male Camlock Adaptor x 20mm Male BSP Thread

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 20mm male camlock x 20mm male BSP thread.

25mm 'F' - 25mm Male Camlock Adaptor x 25mm Male BSP Thread - Poly

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 25mm male camlock x 25mm male BSP thread.

20mm 'A' - 20mm Male Adaptor x 20mm or 3/4" Female BSP Thread

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 20mm male x 20mm or 3/4" female BSP thread.

25mm 'E' - 25mm Male Camlock x 25mm Hose Tail - Poly

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

25mm 'A' - 25mm Male Adaptor x 25mm Female BSP Thread - Poly

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 25mm male x 25mm female BSP thread.

40mm "DP" - 40mm Camlock Dust Plug

Camlock dust plugss are used to keep foreign objects out of any female camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

40mm 'E' - 40mm Male Camlock x 40mm Hose Tail - Poly

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

50mm "DP" - 50mm Camlock Dust Plug

Camlock dust plugss are used to keep foreign objects out of any female camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

40mm 'A'- 40mm Male Adaptor x 40mm Female BSP Thread - Poly

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 40mm male x 40mm female BSP thread.

50mm 'A' - 50mm Male Adaptor x 50mm Female BSP Thread

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 50mm male x 50mm female BSP thread.

Camlock 25mm 'DP' - 25mm Male Camlock Dust Plug - CAM-AL-25-DP

The type "DP" camlock is a male camlock dust plug which is used on the end of female camlocks to prevent dust, dirty and small animals entering the system.   Dust plugs should never be used to close off the system when it is under...

50mm 'F' - 50mm Male Camlock Adaptor x 50mm Male BSP Thread

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 50mm male camlock x 50mm male BSP thread.

Camlock 25mm 'A' - 25mm Male Adaptor x 25mm Female BSP Thread CAM-AL-25-A

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 25mm male x 25mm female BSP thread.

50mm 'E' - 50mm Male Camlock x 50mm Hose Tail

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

Camlock 25mm 'F' - 25mm Male Camlock Adaptor x 25mm Male or 1" BSP Thread - CAM-AL-25-F

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 25mm male camlock x 25mm male BSP thread.

75mm 'F' - 75mm Male Camlock Adaptor x 75mm Male BSP Thread (3" X 3")

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 75mm male camlock x 75mm male BSP thread.

Camlock 25mm 'E' - 25mm Male Camlock x 25mm Hose Tail - CAM-AL-25-E

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

75mm "DP" - 75mm Camlock Dust Plug

Camlock dust plugss are used to keep foreign objects out of any female camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

20mm "DC" - 20mm Camlock Dust Cap with locking arms

Camlock dust caps are used to keep foreign objects out of any male camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

Camlock 40mm 'A'- 40mm Male Adaptor x 40mm Female BSP Thread CAM-AL-40-A

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 40mm male x 40mm female BSP thread.

Camlock 40mm 'DP' - 40mm Male Camlock Dust Plug - CAM-AL-40-DP

The type "DP" camlock is a male camlock dust plug which is used on the end of female camlocks to prevent dust, dirty and small animals entering the system.   Dust plugs should never be used to close off the system when it is under...

75mm 'A' - 75mm Male Adaptor x 75mm Female BSP Thread (3" X 3")

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 75mm male x 75mm female BSP thread.

20mm 'B' - 20mm Female Camlock x 20mm Male BSP Thread

20mm 'C' - 20mm Female Camlock x 20mm Hose Tail

The 'C' type camlock has a female camlock on one end and a male hose tail on the other.   The female camlock end will accept any male camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

75mm 'E' - 75mm Male Camlock x 75mm Hose Tail (3" X 3")

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

Camlock 50mm 'A' - 50mm Male Adaptor x 50mm Female BSP Thread - CAM-AL-50-A

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 50mm male x 50mm female BSP thread.  

Camlock 50mm 'DP' - 50mm Male Camlock Dust Plug - CAM-AL-50-DP

The type "DP" camlock is a male camlock dust plug which is used on the end of female camlocks to prevent dust, dirty and small animals entering the system.   Dust plugs should never be used to close off the system when it is under...

316 S/Steel Camlock 12mm Dust Plug

Our 12mm 316 stainless steel dust plugs are designed for use in any 12mm female Camlock.   All of our 316 stainless steel camlocks are rated to a maximum operating pressure of 1,400 kPa (200 psi) and are manufactured to extremely...

316 S/Steel Camlock 20mm Dust Plug

Our 20mm 316 stainless steel dust plugs are designed for use in any 20mm female Camlock.   All of our 316 stainless steel camlocks are rated to a maximum operating pressure of 1,400 kPa (200 psi) and are manufactured to extremely...

316 S/Steel Camlock 20mm 'A' - 20mm Male Adaptor x 3/4" Female BSP Thread

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 20mm male camlock x 20mm or 3/4" female BSP...

Camlock 40mm 'E' - 40mm Male Camlock x 40mm Hose Tail - CAM-AL-40-E

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

25mm "DC" - 25mm Camlock Dust Cap with locking arms

Camlock dust caps are used to keep foreign objects out of any male camlock fitting.   They should never be used while the system is operating under pressure.   Supplied with a rubber washer seal and locking arms with pins.

25mm 'B' - 25mm Female Camlock x 25mm Male BSP Thread - Poly

The "B" type camlocks have a female camlock end and a male BSP thread of the same size.   The female camlock end fits into any male camlock fitting of the same size.   This unit is 25mm female x 25mm male BSP thread.

25mm 'C' - 25mm Female Camlock x 25mm Hose Tail - Poly

The 'C' type camlock has a female camlock on one end and a male hose tail on the other.   The female camlock end will accept any male camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

25mm 'D' - 25mm Female Camlock x 25mm Female BSP Thread - Poly

The "D" type camlocks have a female camlock end and a female BSP thread of the same size.   The female camlock end fits into any male camlock fitting of the same size.   This unit is 25mm female camlock x 25mm female...

Camlock 40mm 'F' - 40mm Male Camlock Adaptor x 40mm Male or 1 1/2" BSP Thread - CAM-AL-40-F

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 40mm male camlock x 40mm male BSP thread.

316 S/Steel Camlock 20mm 'E' - 20mm Male Camlock x 20mm Hose Tail

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

316 S/Steel Camlock 12mm 'A' - 12mm Male Adaptor x 1/2" Female BSP Thread

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 12mm male camlock x 1/2" female BSP thread.

Camlock 65mm 'DP' - 65mm Male Camlock Dust Plug - CAM-AL-65-DP

The type "DP" camlock is a male camlock dust plug which is used on the end of female camlocks to prevent dust, dirty and small animals entering the system.   Dust plugs should never be used to close off the system when it is under...

Camlock 25mm 'D' - 25mm Female Camlock x 25mm Female BSP Thread - CAM-AL-25-D

The "D" type camlocks have a female camlock end and a female BSP thread of the same size.   The female camlock end fits into any male camlock fitting of the same size.   This unit is 25mm female camlock x 25mm female...

316 S/Steel Camlock 12mm 'E' - 12mm Male Camlock x 12mm Hose Tail

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

316 S/Steel Camlock 20mm 'F' - 20mm Male Camlock Adaptor x 3/4" Male BSP Thread

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 20mm male camlock x 20mm or 3/4" male BSP thread.

Camlock 25mm 'B' - 25mm Female Camlock x 25mm Male BSP Thread - CAM-AL-25-B

The "B" type camlocks have a female camlock end and a male BSP thread of the same size.   The female camlock end fits into any male camlock fitting of the same size.   This unit is 25mm female x 25mm male BSP thread.

316 S/Steel Camlock 25mm 'A' - 25mm Male Adaptor x 1" Female BSP Thread

The "A" type camlocks have a male grooved adaptor and a female BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 25mm male camlock x 25mm female BSP thread.

Camlock 25mm 'DC' - 25mm Female Camlock Dust Cap - CAM-AL-25-DC

The type "DC" camlock is a female camlock dust cap which is used on the end of male camlocks to prevent dust, dirty and small animals entering the system.   Dust caps should never be used to close off the system when it is under pressure.

Camlock 25mm 'C' - 25mm Female Camlock x 25mm Hose Tail - CAM-AL-25-C

The 'C' type camlock has a female camlock on one end and a male hose tail on the other.   The female camlock end will accept any male camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...

Camlock 50mm 'F' - 50mm Male Camlock Adaptor x 50mm Male or 2" BSP Thread - CAM-AL-50-F

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 50mm male camlock x 50mm male BSP thread.

316 S/Steel Camlock 12mm 'F' - 12mm Male Camlock Adaptor x 1/2" Male BSP Thread

The "F" type camlocks have a male grooved adaptor and a male BSP thread of the same size.   The male grooved end fits into any female camlock fitting of the same size.   This unit is 12mm male camlock x 1/2" male BSP thread.

Camlock 50mm 'E' - 50mm Male Camlock x 50mm Hose Tail - CAM-AL-50-E

The 'E' type camlock has a male camlock on one end and a male hose tail on the other.   The male camlock end will accept any female camlock adaptor and the hose tail is inserted inside any hose of the correct size and secured with one of our...