Antelco

4.5mm Tee - All barbed ends

Used to connect 4mm flexible tube in a "T" configuration.

4.5mm Tee - All barbed ends - Bag of 50

Used to connect 4mm flexible tube in a "T" configuration.   Bag of 50 pieces.

4mm Barbed Elbow

To make a sharp 90 degree turn in 4mm flexible tube, use an elbow.

4mm Barbed Elbow - Bag of 50

To make a sharp 90 degree turn in 4mm flexible tube, use an elbow.   This is the 50 piece bag.

4mm Barbed In-Line Tap - Variable Flow

A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray.   These taps are barbed and will...

4mm Barbed In-Line Tap - Variable Flow - Bag of 50

A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray.   These taps are barbed and will...

4mm Goof Repair Plugs Rack of 10

Goof plugs are used to block unwanted holes in low-density poly tube.   The 4mm goof plug will block any hole less than 4mm in diameter such as most of those made by removing a rigid riser...

4mm Jet Punch & Spanner

Used to punch the correct size hole into low-density poly pipe for all 4mm connectors, stake adaptors and all on-line drippers.

4mm Mounting Clip with Nail - Bag of 100

These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.   This is a bag of 100 pieces.

4mm Mounting Clips with Nail

These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.

4mm Rigid Riser x 200mm - Bag of 20

This is a 200mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I...

4mm Rigid Riser x 300mm - Bag of 20

This is a 300mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe.   Although we supply thousands of  these risers, I...

4mm Variable Flow Sprinkler with stake and tube - Pack of 10

This is fantastic value!   Our very popular 4mm Mini-sprinkler with an adjustment tap, plus, a hammer stake and 400mm of tube with a plug-in adaptor to go straight into the poly pipe supply...

4mm Variable Mini-Sprinkler

This mini-sprinkler has an adjustment tap that allows you to vary the distance that the sprinkler will throw.   This item is perfect for garden beds, small turf areas and has a throw...

8 L/H Antelco CETA Pressure Compensated Dripper Bag of 200

The Antelco CETA pressure compensating dripper is made in Australia by Antelco, an Australian Owned company.   This is one of the most accurate drippers available and with...

8 L/H Antelco CETA Pressure Compensated Dripper Bag of 50

The Antelco CETA pressure compensating dripper is made in Australia by Antelco, an Australian Owned company.   This is one of the most accurate drippers available and with...

Adjustable Trickler on 100mm Stake

This is a great emitter for large pots or hanging baskets as it is fully adjustable.   It can also be used around roses bushes, shrubs or even along a flowering border for perfect water...

Adjustable Veri-Flow Dripper

The Veri-Flow adjustable dripper is ideal for irrigating large pots, rose bushes and any shrubs and smaller trees.   With an adjustable output from 0 - 60 L/hour, this is one of our most...

Adjustable Veri-Flow Dripper - Bag of 100

The Veri-Flow adjustable dripper is ideal for irrigating large pots, rose bushes and any shrubs and smaller trees.   With an adjustable output from 0 - 60 L/hour, this is one of our most...

Antelco 180 Degree Micro Spray - Bag of 100 Australian Made

  Single Piece Jets - 180 Degree - Bag of 100Economical fan spray jet for effective watering in domestic and commercial applications.   The spray jet applies a very even "spray"...

Antelco 360 Degree Micro Spray - Bag of 100 Australian Made

Single Piece Jets - 360 Degree - Bag of 100Economical fan spray jet for effective watering in domestic and commercial applications.   The spray jet applies a very even "spray" of water...

Antelco 90 Degree Micro Spray - Bag of 100 Australian Made

  Single Piece Jets - 90 Degree - Bag of 100Economical fan spray jet for effective watering in domestic and commercial applications.   The spray jet applies a very even "spray" of...

CAPO Rubber Grommet 13mm ID for XPANDO fittings

The CAPO rubber grommet is used with XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   The 13mm ID...

CAPO Rubber Grommet 19mm ID x 19mm XPANDO fittings

The CAPO rubber grommet is used with XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm or 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   The...

Micro stake 320mm with 400mm tube and adaptor

The micro stake is used to supply water to any of our 4mm threaded sprays and micro-sprinklers.   It provides a very secure mounting and is easy to connect to the low-density poly supply...

Pot Dripper on a Stake

This is also one of our most popular drippers on a stake.   Use 4mm flexible tube to connect to the supply line and this dripper will provide between 3 and 6 L/hour depending on the...

Reducing Joiner, 19mm to 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 19mm poly pipe and the other side takes the smaller 13mm.  

Reducing Joiner, 25mm x 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm. 

Reducing Joiner, 25mm x 19mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm. 

Reducing Tee 19mm x 13mm

The reducing tees are used where a branch line needs to be smaller than the main.

Reducing Tee 25mm x 13mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.   25mm x 13mm.

Reducing Tee, 25mm x 19mm Branch

The reducing tees are used where a branch line needs to be smaller than the main. 25mm x 19mm.

Spectrum Vortex Spray on Stake 360 degrees

The Vortex spray is fully adjustable from 0 - 90 litres per hour.   The spray that it makes is similar to a mini fountain and it has a radies of 0 - 2m.   Perfect for shrubs,...

Vari-Jet Spray - 1/2 circle 180 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

Vari-Jet Spray - 1/4 circle 90 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

Vari-Jet Spray - Full circle 360 degrees

The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge.   These are adjustable in distance of throw and so this will eliminate...

XPANDO 13mm inlet x 13mm Take-Off

XPANDO 13mm fittings to allow for the easy and secure attachment of 13mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145735 Grommet.

XPANDO 19mm inlet x 19mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 19mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.

XPANDO 19mm inlet x 25mm Take-Off

XPANDO 19mm fittings to allow for the easy and secure attachment of 25mm tube to polyethylene and PVC supply pipes for irrigation systems.   Requires a CAP 10145755 Grommet.