|
Irrigation Warehouse Group Pty Ltd
Current Category
Garden Sprays
|
4mm Variable Mini-Sprinkler
This mini-sprinkler has an adjustment tap that allows you to vary the distance that the sprinkler will throw. This item is perfect for garden beds, small turf areas and has a throw adjustment from 1.0m out to approximately 4.5m. The flow on this unit is from 0 to 105 litres per hour. This sprinkler fits directly onto our micro stake with tube.
|
|
Price:
|
|
|
Vari-Jet Spray - 1/4 circle
The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge. These are adjustable in distance of throw and so this will eliminate water spraying onto concrete paths or other areas that don't need water. The adjustment tap will also provide a limiting factor for wind drift of the spray. Install on a Micro stake with Tube adaptor. This item is for 1/4 circle application and has an adjustable flow from 0 - 130 L/hour with a radius from 0.0m - 3.3m.
|
|
Price:
|
|
|
Vari-Jet Spray - 1/2 circle
The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge. These are adjustable in distance of throw and so this will eliminate water spraying onto concrete paths or other areas that don't need water. The adjustment tap will also provide a limiting factor for wind drift of the spray. Install on a Micro stake with Tube adaptor. This item is for 1/2 circle application and is flow adjustable from 0 - 130 L/hour with a radius from 0m - 3.4m.
|
|
Price:
|
|
|
Vari-Jet Spray - Full circle
The Vari-Jet spray is perfect for small to medium garden beds and should be installed along the front or back edge. These are adjustable in distance of throw and so this will eliminate water spraying onto concrete paths or other areas that don't need water. The adjustment tap will also provide a limiting factor for wind drift of the spray. Install on a Micro stake with Tube adaptor. This item is for full circle application and has an adjustable flow of 0 - 78 L/hour and a radius of throw from 0 - 4.1m.
|
|
Price:
|
|
|
Micro stake with tube and adaptor
The micro stake is used to supply water to any of our 4mm threaded sprays and micro-sprinklers. It provides a very secure mounting and is easy to connect to the low-density poly supply line. You simply punch a small hole into the supply line and push in the connector. This stake and tube will fit all brands of 4mm micro sprays and micro-sprinklers.
|
|
Price:
|
|
|
4mm Variable Flow Sprinkler with stake and tube - Pack of 10
This is fantastic value! Our very popular 4mm Mini-sprinkler with an adjustment tap, plus, a hammer stake and 500mm of tube with a plug-in adaptor to go straight into the poly pipe supply line. This is the pack of 10 complete units!
|
|
Price:
|
|
|
Vortex Spray on Stake
The Vortex spray is fully adjustable from 0 - 90 litres per hour. The spray that it makes is similar to a mini fountain and it has a radies of 0 - 2m. Perfect for shrubs, ceramic and plastic pots, small trees and in the garden bed for flowers. You will need 3-5mm flexible tube with these.
|
|
Price:
|
|
|
4mm Flexible Tube - 25m Roll
This is the best 4mm flexible tube that we can source. It is made from PVC and is perfect for connecting all 4mm and 4.5mm fittings, Vortex sprays, Adjustable sprays and even to the barbed inlet of our drippers. To make it easy to push the tube onto a fitting, dip the end into hot water for 10 seconds and immediately connect. This is the 30m coil.
|
|
Price:
|
|
|
Titan 360 Degree Micro Spray - Bag of 100
The Titan micro-sprays can be installed directly onto low-density poly, on the top of one of our 4mm rigid risers or, on a length of 4mm flexible tube. The 360 Degree (Full Circle) spray applies 70 litres per hour at 100 kPa of pressure. This is the bag of 100.
|
|
Price:
|
|
|
Titan 180 Degree Micro Spray - Bag of 100
The Titan micro-sprays can be installed directly onto low-density poly, on the top of one of our 4mm rigid risers or, on a length of 4mm flexible tube. The 180 Degree (Half Circle) spray applies 35 litres per hour at 100 kPa of pressure. This is the bag of 100.
|
|
Price:
|
|
|
Titan 90 Degree Micro Spray - Bag of 100
The Titan micro-sprays can be installed directly onto low-density poly, on the top of one of our 4mm rigid risers or, on a length of 4mm flexible tube. The 90 Degree (Quarter Circle) spray applies 35 litres per hour at 100 kPa of pressure. This is the bag of 100.
|
|
Price:
|
|
|
