Current Category
Garden Poly fittings > 25mm

	Reducing Tee 19mm x 13mm The reducing tees are used where a branch line needs to be smaller than the main.		Price:	QTY:

	25mm Emd Plug End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.		Price:	QTY:

	25mm In-Line tap Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.		Price:	QTY:

	25mm Poly Clamp Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.		Price:	QTY:

	25mm Poly Elbow Poly x poly elbow used for making 90 degree turns.		Price:	QTY:

	25mm Poly Joiner Poly x poly joiner.		Price:	QTY:

	Reducing Joiner, 25mm x 13mm This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm.		Price:	QTY:

	Reducing Joiner, 25mm x 19mm This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm.		Price:	QTY:

	25mm Poly Tee Poly x poly x poly Tee.		Price:	QTY:

	Reducing Tee 25mm x 13mm Branch The reducing tees are used where a branch line needs to be smaller than the main.		Price:	QTY:

	Reducing Tee, 25mm x 19mm Branch The reducing tees are used where a branch line needs to be smaller than the main.		Price:	QTY:

	25mm x 1" Director Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.		Price:	QTY:

	25mm x 1/2" Female Threaded Elbow Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.		Price:	QTY:

	25mm x 1/2" Female Threaded Tee Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.		Price:	QTY:

	25mm x 1/2" male Elbow Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.		Price:	QTY:

	25mm x 3/4" male Elbow Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.		Price:	QTY:

	25mm x 1/2" male Tee Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.		Price:	QTY:

	25mm x 3/4" male Tee Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.		Price:	QTY: