Current Category
Garden Poly fittings > 19mm

	19mm End Plug End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.		Price:	QTY:

	19mm In-Line Filter In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used.   Ideally, you should install a 25mm plastic disk filter at the tap but the in-line filters will be fine if you have very clean town water.		Price:	QTY:

	19mm In-Line Tap Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.		Price:	QTY:

	19mm Poly Clamp Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.		Price:	QTY:

	19mm Poly Elbow Poly x poly elbow used for making 90 degree turns.		Price:	QTY:

	19mm Poly Joiner Poly x poly joiner.		Price:	QTY:

	Reducing Joiner, 19mm to 13mm This is just like the standard joiner except it has different sized ends.   One side takes the larger 19mm poly pipe and the other side takes the smaller 13mm.		Price:	QTY:

	19mm Poly Tee Poly x poly x poly Tee.		Price:	QTY:

	19mm Poly x Click-On Connection This item connects 19mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 19mm stainless steel Cobra clip to hold the poly pipe.		Price:	QTY:

	19mm x 3/4" Director Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.		Price:	QTY:

	19mm x 1" Director Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.		Price:	QTY:

	19mm x 1/2" Female Threaded Elbow Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.		Price:	QTY:

	19mm x 1/2" Female Threaded Tee Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.		Price:	QTY:

	19mm x 1/2" male Corner Elbow This is a great item.   Used to provide water to a pop-up spray or sprinkler when it is to be located in the corner of the yard.		Price:	QTY:

	19mm x 1/2" male Elbow Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.		Price:	QTY:

	19mm x 3/4" male Elbow Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.		Price:	QTY:

	19mm x 1/2" male Tee Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.		Price:	QTY:

	19mm x 3/4" male Tee Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.		Price:	QTY: