|
Irrigation Warehouse Group Pty Ltd
Current Category
Garden Poly fittings > 13mm
|
13mm End Plug
End plugs are used to close the end of a poly line. All fittings including plugs must be secured to the poly using a clamp.
|
|
Price:
|
|
|
13mm In-Line Filter
In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used. Ideally, you should install a 25mm plastic disk filter at the tap but the in-line filters will be fine if you have very clean town water.
|
|
Price:
|
|
|
13mm In-Line Tap
Our in-line taps are used in the low-density poly line to provide a manual isolation. This is particularly usefull in greenhouses and fern hot houses.
|
|
Price:
|
|
|
13mm Poly Clamp
Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.
|
|
Price:
|
|
|
13mm Poly x Click-On Connector
This item connects 13mm low-density poly pipe directly to a standard Click-On tap connection. Make sure that you use a 13mm stainless steel Cobra clip to hold the poly pipe.
|
|
Price:
|
|
|
13mm x 3/4" Director
Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.
|
|
Price:
|
|
|
13mm x 1" Director
Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.
|
|
Price:
|
|
|
13mm x 1/2" Female Threaded Elbow
Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.
|
|
Price:
|
|
|
13mm x 1/2" Female Threaded Tee
Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.
|
|
Price:
|
|
|
13mm x 1/2" male Tee
Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.
|
|
Price:
|
|
|
