|
Irrigation Warehouse Group Pty Ltd
Current Category
Garden 4mm Fittings

|
4.5mm Barbed Connector
These joiners are barbed on both ends and are used to join our 4mm flexible tubing.
|
|
Price:
|
|

|
4.5mm Barbed Connector - Bag of 100
Used to connect 3/5 flexible tube to the 13/19/25mm low-density poly supply line. Also used to connect 3/5 flexible tube to 3/5 flexible tube. This is the bulk 100 pieces bag.
|
|
Price:
|
|

|
4mm Barbed Elbow
To make a sharp 90 degree turn in 3/5mm flexible tube, use an elbow.
|
|
Price:
|
|

|
4mm Barbed In-Line Tap - Variable Flow
A 4mm in-line tap can be installed anywhere on the 4mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray. These taps are barbed and will only fit the 3/5mm flexible tube or the 4mm flexible tubes, they will not fit into the rigid risers.
|
|
Price:
|
|

|
4mm Barbed In-Line Tap - Variable Flow - Bag of 50
A 4mm in-line tap can be installed anywhere on the 3/5mm flexible tube to provide on/off or to allow adjustment to pressure and flow of a sprinkler or spray. These taps are barbed and will only fit the 3/5 flexible tube or the 4mm flexible tubes, they will not fit into the rigid risers. This bag has 50 taps.
|
|
Price:
|
|

|
4mm Goof Repair Plugs Rack of 10
Goof plugs are used to block unwanted holes in low-density poly tube. The 4mm goof plug will block any hole less than 4mm in diameter such as most of those made by removing a rigid riser spray. The goof plug is supplied in racks of 10, so if you order 3 you will receive 3 x racks of 10 plugs.
|
|
Price:
|
|

|
4mm Jet Punch & Spanner
Used to punch the correct size hole into low-density poly pipe for all 4mm connectors, stake adaptors and all on-line drippers.
|
|
Price:
|
|

|
4mm Mounting Clips with Nail
These clips are used to secure 3/5mm and 4mm flexible tube to timber frames in greenhouses or along the balcony or fence.
|
|
Price:
|
|

|
4mm Flexible Tube x 30m coil
4mm Flexible tube is used to connect all 4mm fittings to drippers, vortex sprays and any other micro unit. To make it easier to insert the 4mm barb into the tube, put the end of the tube in hot water for a few seconds and then immediately insert the barb. This is the 30m coil.
|
|
Price:
|
|

|
4mm Rigid Riser x 300mm - Bag of 20
This is a 300mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe. Although we supply thousands of these risers, I always recommend to customers that they use the Micro Stake with tube and adaptor if possible, as it is a far more practical and robust item that is more difficult to dislodge and allows you to move the spray/sprinkler away from the supply line if required. This is a bag with 20 x risers.
|
|
Price:
|
|

|
4mm Rigid Riser x 200mm - Bag of 20
This is a 200mm high rigid 4mm riser tube that comes with a threaded adaptor in the end to punch directly into low-density poly pipe. Although we supply thousands of these risers, I always recommend to customers that they use the Micro Stake with tube and adaptor if possible, as it is a far more practical and robust item that is more difficult to dislodge and allows you to move the spray/sprinkler away from the supply line if required. This is a bag with 20 x risers.
|
|
Price:
|
|

|