Home
Contact Us
Freight & Terms
Tank Info
Tank Colours
Search
View Cart
Wholesale

Adaptors BSP/NPT
Air Release Valves
Aluminium fittings
Bolts & Nuts
Brass Nut & Tail
Brass Director
Budget Pumps
Camlocks
Cartage Tanks
Clamps
Cobra Clips
Controllers
Control cable
Drippers
Drip Line
Drip line Clamps
Drip Line Fittings
Eco-Care Grey Water
Fertilizer Injection
Fertilizer Meters
Filters
Fire Fighting
First Flush Diverters
Float Switch
Garden 4mm Fittings
Garden poly pipe
Garden Poly fittings
Garden Pop-Up Sprays
Garden Pop-Up Sprinklers
Garden Sprays
Garden Taps
Garden Valves
Gaskets
Grey Water
Hose Fittings
Hoses
Hose Reels
Metric Poly Fittings
Olive Sprinklers
Pipe
Pipe Repair Couplings
Pipe Fittings - Nyglass
Pipe Fittings - Stainless Steel
Pressure Gauges
PRV
Pumps
Pump Covers
PVC Fittings
Rural Poly Fittings
Saddles
Soil Moisture Monitoring
Sprinklers
Stock Tanks
Storz Fittings
Tank Accessories
Tank Colours
Tank Fittings
Tank Pump Kits
Tanks NSW & ACT
Tanks SA
Tanks - SQLD
Tanks - Victoria
Tap Connection Kits
Tap timers
Threaded Risers
Town Tank Switch
Travelling Irrigators
Valves
Valve Boxes
Victaulic clamps
Water Meters
Freight

Irrigation Warehouse Group Pty Ltd

Current Category
Garden Poly fittings


 




13mm End Plug

13mm End Plug

End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

Price:







QTY:

        
13mm In-Line Filter

13mm In-Line Filter

In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used.   Ideally, you should install a 25mm plastic disk filter at the tap but the in-line filters will be fine if you have very clean town water.

Price:







QTY:

        
13mm In-Line Tap

13mm In-Line Tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.

Price:







QTY:

        
13mm Poly Clamp

13mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

Price:







QTY:

        
13mm Poly Elbow

13mm Poly Elbow

Poly x poly elbow used for making 90 degree turns.

Price:







QTY:

        
13mm Poly Joiner

13mm Poly Joiner

Poly x poly joiner.

Price:







QTY:

        
13mm Poly Tee

13mm Poly Tee

Poly x poly x poly Tee.  

Price:







QTY:

        
13mm Poly x Click-On Connector

13mm Poly x Click-On Connector

This item connects 13mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 13mm stainless steel Cobra clip to hold the poly pipe.

Price:







QTY:

        
13mm x 3/4" Director

13mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

Price:







QTY:

        
13mm x 1" Director

13mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

Price:







QTY:

        
13mm x 1/2" Female Threaded Elbow

13mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
13mm x 1/2" Female Threaded Tee

13mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
13mm x 1/2" male Elbow

13mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

Price:







QTY:

        
13mm x 1/2" male Tee

13mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

Price:







QTY:

        
19mm End Plug

19mm End Plug

End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

Price:







QTY:

        
19mm In-Line Filter

19mm In-Line Filter

In-Line filters must be installed wherever micro sprays, drippers or micro sprinklers are to be used.   Ideally, you should install a 25mm plastic disk filter at the tap but the in-line filters will be fine if you have very clean town water.

Price:







QTY:

        
19mm In-Line Tap

19mm In-Line Tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.

Price:







QTY:

        
19mm Poly Clamp

19mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

Price:







QTY:

        
19mm Poly Elbow

19mm Poly Elbow

Poly x poly elbow used for making 90 degree turns.

Price:







QTY:

        
19mm Poly Joiner

19mm Poly Joiner

Poly x poly joiner.  

Price:







QTY:

        
Reducing Joiner, 19mm to 13mm

Reducing Joiner, 19mm to 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 19mm poly pipe and the other side takes the smaller 13mm.  

Price:







QTY:

        
19mm Poly Tee

19mm Poly Tee

Poly x poly x poly Tee.  

Price:







QTY:

        
19mm Poly x Click-On Connection

19mm Poly x Click-On Connection

This item connects 19mm low-density poly pipe directly to a standard Click-On tap connection.   Make sure that you use a 19mm stainless steel Cobra clip to hold the poly pipe.

Price:







QTY:

        
19mm x 3/4" Director

19mm x 3/4" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

Price:







QTY:

        
19mm x 1" Director

19mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

Price:







QTY:

        
19mm x 1/2" Female Threaded Elbow

19mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded elbows are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
19mm x 1/2" Female Threaded Tee

19mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
19mm x 1/2" male Corner Elbow

19mm x 1/2" male Corner Elbow

This is a great item.   Used to provide water to a pop-up spray or sprinkler when it is to be located in the corner of the yard.

Price:







QTY:

        
19mm x 1/2" male Elbow

19mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

Price:







QTY:

        
19mm x 3/4" male Elbow

19mm x 3/4" male Elbow

Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.

Price:







QTY:

        
19mm x 1/2" male Tee

19mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

Price:







QTY:

        
19mm x 3/4" male Tee

19mm x 3/4" male Tee

Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Price:







QTY:

        
Reducing Tee 19mm x 13mm

Reducing Tee 19mm x 13mm

The reducing tees are used where a branch line needs to be smaller than the main.

Price:







QTY:

        
25mm Emd Plug

25mm Emd Plug

End plugs are used to close the end of a poly line.   All fittings including plugs must be secured to the poly using a clamp.

Price:







QTY:

        
25mm In-Line tap

25mm In-Line tap

Our in-line taps are used in the low-density poly line to provide a manual isolation.   This is particularly usefull in greenhouses and fern hot houses.

Price:







QTY:

        
25mm Poly Clamp

25mm Poly Clamp

Poly ratchet clamps should be used on all low-density poly fittings to ensure that the tube stays on the barbed fitting.

Price:







QTY:

        
25mm Poly Elbow

25mm Poly Elbow

Poly x poly elbow used for making 90 degree turns.

Price:







QTY:

        
25mm Poly Joiner

25mm Poly Joiner

Poly x poly joiner.  

Price:







QTY:

        
Reducing Joiner, 25mm x 13mm

Reducing Joiner, 25mm x 13mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 13mm. 

Price:







QTY:

        
Reducing Joiner, 25mm x 19mm

Reducing Joiner, 25mm x 19mm

This is just like the standard joiner except it has different sized ends.   One side takes the larger 25mm poly pipe and the other side takes the smaller 19mm. 

Price:







QTY:

        
25mm Poly Tee

25mm Poly Tee

Poly x poly x poly Tee.  

Price:







QTY:

        
Reducing Tee 25mm x 13mm Branch

Reducing Tee 25mm x 13mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.



Price:







QTY:

        
Reducing Tee, 25mm x 19mm Branch

Reducing Tee, 25mm x 19mm Branch

The reducing tees are used where a branch line needs to be smaller than the main.

Price:







QTY:

        
25mm x 1" Director

25mm x 1" Director

Directors are used to connect low-density poly pipe onto solenoid valves and any other female BSP fitting.

Price:







QTY:

        
25mm x 1/2" Female Threaded Elbow

25mm x 1/2" Female Threaded Elbow

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
25mm x 1/2" Female Threaded Tee

25mm x 1/2" Female Threaded Tee

Poly x 1/2" female threaded tees are used to install an articulated riser for a pop-up sprinkler/spray or, to install a 1/2" male riser so that a larger spray or sprinkler can be mounted well above the ground.

Price:







QTY:

        
25mm x 1/2" male Elbow

25mm x 1/2" male Elbow

Poly x 1/2" male elbow used to provide water to a pop-up spray or riser outlet.

Price:







QTY:

        
25mm x 3/4" male Elbow

25mm x 3/4" male Elbow

Poly x 3/4" male elbow used to provide water to a pop-up spray or riser outlet.

Price:







QTY:

        
25mm x 1/2" male Tee

25mm x 1/2" male Tee

Poly x 1/2" male x poly tee used to provide water to a pop-up spray or a riser with a spray outlet on top.

Price:







QTY:

        
25mm x 3/4" male Tee

25mm x 3/4" male Tee

Poly x 3/4" male x poly tee used to provide water to a pop-up spray, sprinkler or a riser with a spray outlet on top.

Price:







QTY: