Home
Contact Us
Freight & Terms
Tank Info
Tank Colours
Search
View Cart
Wholesale
BSP Threads

AcquaSaver Valve
Adaptors BSP/NPT/USGT
Air Release Valves
Aluminium fittings
Brass Nut & Tail
Camlocks
Cartage Tanks
Clamps
Cobra Clips
Controllers
Control cable
Drippers
Drip Line
Drip line Clamps
Fertilizer Injector
Fertilizer Meters
Filters
Fire Fighting
First Flush Diverters
Flanges
Float Switch
Garden 4mm Fittings
Garden poly pipe
Garden Poly fittings
Garden Pop-Up Sprays
Garden Pop-Up Sprinklers
Garden Sprays
Garden Taps
Garden Valves
Gaskets
Grey Water
Hose Fittings
Hose Tails
Hoses
Hose Nozzles
Hose Reels
IBC Fittings
Lawn Sprinklers
Metric Poly Fittings
Misting Valve
Olive Sprinklers
Pipe
Pipe Fittings - Nyglass
Pipe Fittings - Stainless Steel
Pipe Repair Clamps
Pressure Gauges
PRV
Pumps
Pump Covers
PVC Fittings
Rural Poly Fittings
Saddles
Soil Moisture Monitoring
Sprinklers
Storz Fittings
Tank Accessories
Tank Fittings
Tank Pump Kits
Tanks NSW & ACT
Tanks - SQLD
Tanks - Victoria
Tap Connection Kits
Tap timers
Teflon Tape
Threaded Risers
Town Tank Switch
Turf Sprinklers
Travelling Irrigators
Valves
Valve Boxes
Victaulic clamps
Water Meters

Irrigation Warehouse Group Pty Ltd

Current Category
Fire Fighting


Our Fire-Fighting pumps have all been tested "In the Field" so that we know they will perform.    These pumps are proven performers that provide real value and reliability and all of them have the genuine Honda engines.




5.5 hp Honda GX160 Engine with Heavy Duty "Koshin Japan" Single Impeller Fire Pump and Roll Frame - Made in Japan

5.5 hp Honda GX160 Engine with Heavy Duty "Koshin Japan" Single Impeller Fire Pump and Roll Frame - Made in Japan

This is our most popular heavy duty single impeller fire pump.   The unit is supplied with the very reliable genuine Honda GX160 5.5 HP (Made in Japan)engine coupled to an extremely strong cast aluminium pump body that is also made in Japan by "Koshin".   Cast inlet and outlet blocks are provided for added strength (and they are easily replaced if damaged) and the roll frame even has anti vibration rubber feet.   The Honda GX160 engine uses standard unleaded fuel and is the engine of choice for pumps used in many applications including fighting fires, water transfer, irrigation and general use.   The fuel tank has a capacity of 3.1 litres.   Additional freight applies.   Click here to download the spec sheet.

Price:







QTY:

        
5.5 hp Honda Engine with Heavy Duty Single Impeller Fire Pump and Roll Frame and Season Special Hose Kit and Hose Reel with hose

5.5 hp Honda Engine with Heavy Duty Single Impeller Fire Pump and Roll Frame and Season Special Hose Kit and Hose Reel with hose

This is our most popular heavy duty single impeller fire pump.   The unit is supplied with the very reliable genuine Honda GX160 5.5 HP (Made in Japan) engine coupled to an extremely strong cast aluminium pump body that is also made in Japan by "Koshin".   Cast inlet and outlet blocks are provided for added strength (and they are easily replaced if damaged) and the roll frame even has anti vibration rubber feet.   The Honda GX160 engine uses standard unleaded fuel and is the engine of choice for pumps used in many applications including fighting fires, water transfer, irrigation and general use.   The fuel tank has a capacity of 3.1 litres.   Additional freight applies.   This is everything required for a good quality and reliable outfit to spray loads of water at pressure out of the hose reel.   Click here to download the spec sheet.

Price:







QTY:

        
Hose Reel with 25m of 19mm Hose, Brass Nozzle and Brass Connection.

Hose Reel with 25m of 19mm Hose, Brass Nozzle and Brass Connection.

An excellent steel hose reel complete with 25m of 19mm PVC hose (AS1221) and brass spray/jet nozzle.   This item is powder coated steel weighs only 18 kg and comes complete with a 1m long flexible inlet connection hose with brass nut & Tail that screws onto any 25mm male BSP thread ready for immediate use.   Please note that most garden taps in NSW have a 25mm male BSP outlet.   Use the Hose Reel for high-flow washdown, on the back of your truck, on the spray rig or anywhere else where an extremely reliable steel hose reel is needed.   This is the perfect hose for use in your garden as it really is quite easy to roll the hose back onto the reel when you have finished.   The steel base has mounting holes and the handle really works well.   The unit is approximately 520mm high x 400mm wide x 420mm long.   Additional freight applies.

Price:







QTY:

        
Aluminium Hose Reel with 30m of 25mm Fire Hose and metal nozzle

Aluminium Hose Reel with 30m of 25mm Fire Hose and metal nozzle

This is a serious hose reel system with a heavy duty aluminium frame that can be bolted to a truck or trailer or even used around the factory or farm.   This unit comes complete with 30m of 25mm black fire hose, a winding handle, 25mm brass ball valve and swivel connection, nylon roller guides on the hose winding system and the shaft is supported by heavy duty bearings complete with grease nipples.   The fire nozzle supplied with the unit is ideal for all applications including fire fighting, washdown and even truck washing duties.   It is definitely not a cheap unit and will last for a lifetime.   Additional freight applies.

Price:







QTY:

        
Alloy Fire Hose Nozzle with 20mm brass barbed inlet - Fan and Jet

Alloy Fire Hose Nozzle with 20mm brass barbed inlet - Fan and Jet

This 20mm alloy fire hose nozzle comes with a brass barbed end to suite 19mm (20mm) fire hose.   All solid alloy construction with NBR (natural black rubber) seal and knock ring, this excellent nozzle is suitable for operating pressures to 1,000 kPa and a minimum flow of 30 L/minute out to a massive 100 L/Min.   It will adjust easily to provide anything from a hard jet for washdown and distance fire fighting to a wide angle fan spray.



Price:







QTY:

        
Alloy Fire Hose Nozzle with 25mm brass barbed inlet - Fan and Jet

Alloy Fire Hose Nozzle with 25mm brass barbed inlet - Fan and Jet

This 25mm alloy fire hose nozzle comes with a brass barbed end to suite 25mm fire hose.   All solid alloy construction with NBR (natural black rubber) seal and knock ring, this excellent nozzle is suitable for operating pressures to 1,000 kPa and a minimum flow of 30 L/minute out to a massive 120 L/Min.   It will adjust easily to provide anything from a hard jet for washdown and distance fire fighting to a wide angle fan spray for close in work.



Price:







QTY:

        
38mm Brass Fire Nozzle with Rubber Ring

38mm Brass Fire Nozzle with Rubber Ring

The daddy of all brass fire nozzles, this 38mm unit is solid brass with NBR sealing rings and knock ring around the outside.   The brass fire nozzles will operate at pressures to 1,600 kPa and can be easily adjusted to produce a stream from a jet to a rain curtain with a twist of the rubber knock ring.   Suitable for fire fighting, washdown and any other application where a high quality nozzle is required.   The minimum operating flow for this nozzles is 100 Litres per minute.

Price:







QTY:

        
Brass and Copper Fire Nozzle with 38mm inlet and 12mm nozzle (370mm Long)

Brass and Copper Fire Nozzle with 38mm inlet and 12mm nozzle (370mm Long)

This is a real fire nozzle with 38mm female BSP inlet and 12mm brass nozzle with a copper flute.   This is perfect for use with 38 or 40mm layflat hose as a fire fighting nozzle and it puts out 164 L/Min @ 300 kPa, 190 L/Min @ 400 kPa and, 212 L/Min @ 500 kPa, pressure is at the nozzle.   We recommend that you also buy a 40mm nipple, 40mm nyglass ball valve and then a hose tail to connect to your hose.

Price:







QTY:

        
Brass and Copper Fire Nozzle with 50mm inlet and 16mm nozzle (450mm Long)

Brass and Copper Fire Nozzle with 50mm inlet and 16mm nozzle (450mm Long)

This is a real fire nozzle with 50mm female BSP inlet and 16mm brass nozzle with a copper flute.   This is perfect for use with 50mm layflat hose as a fire fighting nozzle and it puts out 292 L/Min @ 300 kPa, 338 L/Min @ 400 kPa and, 378 L/Min @ 500 kPa, pressure is at the nozzle.   We recommend that you also buy a 50mm nipple, 50mm nyglass ball valve and then a hose tail to connect to your hose.

Price:







QTY:

        
Australian Made 25mm Black Fire Hose 1,200 kPa 20m Roll

Australian Made 25mm Black Fire Hose 1,200 kPa 20m Roll

Our 25mm Australian Made Black Fire Hose has a black inner and outer and is rated for use to 1,200 kPa.   This is the hose that you see on building fire reels and is an excellent reinforced hose suitable for use with firefighter pumps and in all water pressure hose situations.   I.D. 25.0mm O.D. 33mm x per 20 meter roll.   See our range of fire nozzles and Brass connectors.   Certified Product to Australian Standard AS1221.

Price:







QTY:

        
10m Suction hose kit for Fire Pump with 50mm inlet - Heavy Duty with footvalve and camlocks

10m Suction hose kit for Fire Pump with 50mm inlet - Heavy Duty with footvalve and camlocks

The ultimate in reliability for a long suction hose, this kit is supplied completely assembled so that you can use it straight out of the box.   The 10m length of 50mm blue "Nitrile" suction hose has a white hard PVC helix inside to maintain its round shape even under maximum suction, fitted with a Hansen 50mm foot valve, Norma all stainless steel clamps and heavy duty aluminium camlock fittings for instant secure connection to the inlet of your pump.   This unit is designed for use with any brand of fire fighting style pump that has a 2" male BSP inlet.   If your pump has the 1 1/2" inlet, we can supply a bush so that it still fits perfectly.   Note, the image shows a length of hose longer than 10m.

Price:







QTY:

        
20m Suction hose kit for Fire Pump with 50mm inlet - Heavy Duty with footvalve and camlocks

20m Suction hose kit for Fire Pump with 50mm inlet - Heavy Duty with footvalve and camlocks

The ultimate in reliability for a long suction hose, this kit is supplied completely assembled so that you can use it straight out of the box.   The 20m length of 50mm blue "Nitrile" suction hose has a white hard PVC helix inside to maintain its round shape even under maximum suction, fitted with a Hansen 50mm foot valve, Norma all stainless steel clamps and heavy duty aluminium camlock fittings for instant secure connection to the inlet of your pump.   This unit is designed for use with any brand of fire fighting style pump that has a 2" male BSP inlet.   If your pump has the 1 1/2" inlet, we can supply a bush so that it still fits perfectly.   Note, the image shows a 20m length of hose.

Price:







QTY: