|
Irrigation Warehouse Group Pty Ltd
Current Category
Drip Line > 16mm Drip-In
All of our 16mm poly Drip-In fittings are Australian Made and supplied in bulk if required.
|
16mm Drip-In Grommet and take-off complete
The grommet goes into the hole in the sub-main supply and the take-off is pushed firmly into the grommet for a waterproof join. The 16mm Drip-In goes onto the take-off and is secured with a stainless steel Cobra clamp or plastic ratchet clamp for a perfect connection.
|
|
Price:
|
|
|
16mm Drip-In In-line-tap
The in-line tap allows for temporary isolation of the drip line or can also be installed on the end for manual flushing of the drip line.
|
|
Price:
|
|
|
16mm Drip-In s/steel Cobra clamp
The Cobra clamp is a full stainless steel clamp that is prefect for securing all Drip-In barbed fittings. This clamp will never rot or rust and can be removed if necessary. I strongly recommend the Cobra stainless steel clamp be used on all belwo-ground connections.
|
|
Price:
|
|
|
16mm Drip-In Ratchet Clamp
The plastic version of the ratchet clamp is great for any above-ground connections with all 16mm Drip-In fittings.
|
|
Price:
|
|
|
16mm Drip-In Automatic Flushing Valve
I strongly recommend that these automatic flushing valves be installed on the end of every Drip-In dripline run. The flushing valve operates when water enters the drip line at the commencement of irrigation and it allows several litres of water to be flushed out through the valve. This water takes with it the accumulated silt and dirt that has passed through the filters. When installed, these units will save hours of manual line flushing time. A fantastic and yet simple idea tosave you time.
|
|
Price:
|
|
|
